We build
what we
install.

Most fence companies in Los Angeles buy panels and hang them. We start with steel tube and hardwood, and the gate that arrives at your driveway was square on our bench first. That difference shows up in year eight.

Ipe horizontal slat fence with an integrated mailbox, built in Tarzana

Fabricated on Ventura Boulevard, Tarzana

Twenty-two years, in order

2004
The shop opens in Tarzana
Founded on Ventura Boulevard as a fabrication shop first and a fencing contractor second — the order that still decides how we work.
2009
Automation becomes half the work
Gate operators, safety sensors and access control grow from an add-on into a discipline of its own. Every automatic gate leaves tested to UL 325.
2015
Hardwood takes over
Ipe, mahogany and redwood displace stock panels as the default for west-side work. Every hardwood leaf gets a welded steel chassis underneath.
2020
Coastal specification splits out
Hot-dip galvanised substrate becomes standard on anything within a couple of miles of the water, and stays off the quote everywhere else.
2026
Twenty-two years, same bench
Same owner, same crew, same building. Everything we install anywhere in the county is still cut, welded and coated here first.

On the record

Licence: CSLB 952680
Status: Licensed, bonded & insured
Founded: 2004, Tarzana
Standards: UL 325 · ASTM F2200
Permits: LADBS & HOA submittal handled
Hours: Mon–Sat 7:00–18:00

How we work

The metalwork is not subbed out

Gates are cut, welded, ground and coated in our own shop. That is why we can make a replacement part instead of ordering one and waiting three weeks for it.

The quote states the specification

Gauge, species, finish, operator model, clear opening. When two quotes differ by thousands it is usually because one of them is not saying what it is actually building.

No quote from photographs

We measure the opening, the slope, the swing path and the utility lines on site. A number given over the phone before any of that is a number that changes later.